Torque Tool Supplies Hire Equipment

Hire Hydraulic Torque Wrenches. Mining Petrochemical Power Generation Quarry Rail Manufacturing Earth Moving. At TTS ( Torque Tool Supplies ) you can Hire Hytorc Multipliers mxt all sizes from 1/2 drive to 2-1/2″ Square Drive. Our hire hy Torque tools offer torque from 150 – 50,000 Ft lbs. You can also Hire Impact Sockets metric and Imperial. Our Hire High Torque hydraulic tools in Hex Cassette offer accurate torque and enormous power for undoing. 

Supplying QLD: Brisbane, Mackay WA: Western Australia Perth Karratha Whyalla Roxby Downs NSW New South Wales Sydney Newcastle VIC Victoria Melbourne SA South Australia.

See below for information on the tools we have available for hire.

For Purchasing or hiring enquiries give us a call or send us a message

Hydraulic Torque Wrench - Square Drive​

Part Number Model Square Drive Torque (Ft Lbs) Torque (NM) Weight (KG)
91062 IBT-1 3/4″ 134 – 1,344 183 – 1,837 2.5
91064 IBT-3 1″ 328 – 3,278 451 – 4,512 5
91066 IBT-5 1-1/2″ 547 – 5470 752 – 7,528 8
91068 IBT-8 1-1/2″ 783 – 7,831 1,078 – 10,780 11
91070 IBT-10 1-1/2″ 1,127 – 11,272 1,551 – 15,516 15
91072 IBT-20 2-1/2″ 1,937 – 19,370 2,666 – 26,664 26
91074 IBT-25 2-1/2″ 2,523 – 25,226 3,472 – 34,725 35
91076 IBT-35 2-1/2″ 3,535 – 35,354 4,866 – 48,666 50
91078 IBT-50 2-1/2″ 5,230 – 52,300 7,200 – 72,000 87

Wren Hydraulic torque wrenches are unmatched for power and torque accuracy. The IBT range offers 134 – 52,300 FT LBS (183 – 72,000 NM) of torque. Hydraulic Torque Wrenches offer powerful solutions due to their size, weight and power advantages.

Hydraulic Torque Wrench - Hex Cassette​

Part NumberModelHex Cassette Size Range A/FTorque OutputWeight
Ft LbsNM
ImperialMetricMinMaxMinMaxLbsKg
90076LOW-23/4″ – 2-1/4″19-651691,6912292,2924.52
90078LOW-41″ – 3-1/8″25-804264,2565775,7699.74.4
90080LOW-81-5/8″ – 4-1/8″46-1057957,9481,07810,77419.59
90082LOW-142-1/2″ – 5-3/8″50-1171,34613,4561,82518,2403315
90086LOW-303-1/2″ – 6-1/2″110-1753,04330,4264,12541,2447835.5

Low profile hex cassettes are perfect for tight access jobs. The LOW range offers 171 – 31,800 FT LBS (346 – 43,108 NM) of torque. Low profile torque wrenches are very popular on pipe flanges, cap screws, foundation bolts and more.

Pneumatic Nutrunners​

Part Number Tool Model Square Drive Torque (Ft Lbs) Torque (NM) RPM Weight (KG)
33880 350 SL 3/4″ 50 – 350 70 – 475 65 2.7
33885 7 GX 3/4″ 100 – 700 130 – 950 30 3.6
33886 10 GX 3/4″ 200 – 1,000 270 – 1,350 20 3.6
33888 15 DX 1″ 300 – 1,500 400 – 2,000 10 3.9
33890 2000 1″ 500 – 2,000 700 – 2,700 13 6
33895 25 GX 1″ 800 – 2,500 1,100 – 3,400 8 6
33900 34 GX 1″ 1,000 – 3,400 1,400 – 4,600 12 9
33910 50 1-1/2″ 1,500 – 5,000 2,000 – 6,800 7 12.7
33915 60 DX 1-1/2″ 2,000 – 6,000 2,700 – 8,130 6.6 12.7
33920 85 GX 1-1/2″ 3,000 – 8,500 4,070 – 11,520 4.5 17.4

These are the single speed tools within the RAD range. They are the standard tool, and the most commonly used. These tools compbine the speed of rattle guns with the controlled torque of hydraulic torque wrenches. These tools are the quietest, fastest and lightest tools in the field. They work using compressed air, which goes through a lubro regulator and then to the tool. These tools offer fast, controlled torque.

240V & Air Powered Hydraulic Pumps & Hoses​

240V Hydraulic Wrench Pump

Part Number: P72773Flow Rate: 8.4 litres / minute
Model: KLW4000APower: 220 – 240 volt – 50 HZ
Shift Valve: Advance / auto returnDBA: 70 DBA at 10,000 PSI
Cooling: Heat exchangerWeight: 27 KG
Ports: 2 – 4 portsSump: 9 Litres
Hydraulic Oil: Viscosity 46Max Pressure: 700 BAR / 10,000 PSI
Remote Length: 6 metresRegulator 1,200 – 10,000 PSI
Roll Cage: Standard or heavy duty 

Pneumatic/Air Hydraulic Wrench Pump

Part Number: P72773Flow Rate: 7 litres / minute
Model: KLW4000N

Air Flow: 4-6 Bar / 60 – 100 PSI @ 25 – 35 CFM

Shift Valve: Advance / auto return

DBA: 70 DBA at 10,000 PSI

Cooling: Internal, input air circulated through pump via heat exchanger

Weight: 21 KG

Ports: 2 – 4 portsSump: 9 Litres
Hydraulic Oil: Viscosity 46Max Pressure: 700 BAR / 10,000 PSI
Remote Length: 6 metresRegulator 1,200 – 10,000 PSI
Roll Cage: Standard or heavy duty 

High Torque Hose Sets

Part Number:4937
Description:High Torque Hose set
Type:1/4″ Twin Line – Steel Braid
Rating:4:1 10,000 Working Pressure
Couplers:1/4″ Screw Ball connect (2 female) (2 Male) Supplied
Hose Guards:Optional
Hydraulic Test Tag:Supplied 
Available Lengths:1m, 2m, 3m, 4m, 5m, 7m, 10m, 15m 
Colour:  Yellow 
Weight:  4.7 kg – 5m Hose 
High torque hoses are used to connect hydraulic tools to the pump. hoses have a working pressure of 10,000 PSI with a burst limit of 40,000 PSI and have a standard ratio of 4:1. Hoses come pre assembled with couplers, and are bled, testsed at 10,000 PSI and tagged. Custum length hoses are also available.

Jacking Rams/Cylinders, Porta Power Pumps & Hoses​

Select One of the images below to find more information

Standard

Cylinders

Low Profile

Cylinders

Hollow

Cylinders

Locking Collar

Cylinders

Huck Rivet Guns - Standard & Offset​

Part Number Tool Model Rivet Size
80065 3585 1/2″
80070 3585 5/8″
80075 3585 3/4″
80080 2630 7/8″
80085 507 1″
80090 507 1-1/8″

Supplied in the kit is the huck Tool ( in your required size ) 7m hose set and a 240V Hydraulic Pump. 

Note: We also Stock Huck Bolts

Standard Huck Guns: The above tool suit the C50L Huck bolts. Once you know your grip length and rivet type / size you require your able to select the size tool for the job. For more info contact 0488 595 950. Hire and Sales.

Tool Model Tool Rivit Size
80092 6304 5/8″ / 16mm
80094 7304 3/4″ / 19mm
80096 8304 7/8″ / 22mm
80098 9304 1″ / 25mm

Supplied in the kit is the huck Tool ( in your required size ) 7m hose set and a 240V Hydraulic Pump. 

Note: We also Stock Huck Bolts

Off Set Huck Guns are designed for tight access areas. The nose is off set to one side to permit closer access to 90 degree joints. Operates similar to the standard tools. Specialized – For more info contact 0488 595 950. Hire and Sales.

Part Number Power Source Description
40995 240 Volt Powered by 240 volts
9654 Compressed Air Powered by Compressed air Min 80 psi, min 35 cfm

Hydraulic Pumps: Huck pumps are available in 240 volt or air driven. These double acting pumps are configured and ported specifically to run Huck tools. They use pre set pressures and automatically retract and shut off when the cycle is complete.

  Round HeadTruss Head
C50LT
C50LT90 Flush
Head
Stainless Steel
Capped Head
Thread Head
C50LT
DiameterCodeABCBCBCBCBCBC
1/2″160.515 – 0.4900.9060.3160.9060.241.090.2260.9060.25    
5/8″200.642 – 0.6171.1410.3971.1410.2971.330.3151.140.3131.440.39  
3/4″240.768 – 0.7411.3830.4951.3830.36  1.370.375    
7/8″280.895 – 0.8661.610.551.610.42  1.5940.43    
1″321.025 – 0.9901.850.618          
1-1/8″361.095 – 1.1252.0630.688          
1-3/8″441.400 – 1.3502.538.85    2.510.67   1.688

Hand Operated Torque Wrenches​

Part Number Model Square Drive Torque FT LBS Torque NM Weight Length
90114 TT100 1/2″ 15 – 75 20 – 100 1.0 kg 405 mm
90116 TT150 1/2″ 20 – 110 30 – 150 1.1 kg 455 mm
90118 TT200 1/2″ 30 – 150 40 – 200 1.2 kg 505 mm
90120 TT250 1/2″ 40 – 185 50 – 250 1.4 kg 560 mm
90122 TT300 1/2″ 45 – 220 60 – 300 1.6 kg 610 mm
90124 TT400 3/4″ 60 – 300 80 – 400 2.1 kg 683 mm

The Norbar TT series hand torque wrenches offer a popular combination of features. Torque is fully adjustable by simply rotating the handle and reading the sight glass. Displays in both Ft Lbs and NM, and all TT models feature ratchets for ease of operation.

Part Number Model Square Drive Torque FT LBS Torque NM Weight Length
90001 3AR 3/4″ 70 – 350 100 – 500 5.2 kg 910 mm
90006 4R 3/4″ 100 – 500 150 – 700 6.3 kg 1,150 mm
90007 4AR 3/4″ 150 – 600 200 – 800 6.4 kg 1,215 mm
90009 5R 3/4″ 200 – 750 300 – 1000 7.3 kg 1,475 mm
90012 5AR 3/4″ 500 – 1,000 700 – 1,500 10.4 kg 1,475 mm
9001201 5AR-1 1″ 500 – 1,000 700 – 1,500 10.4 kg 1,475 mm

The Norbar Industrial AR series hand torque wrenches offer “over center” torque control. This means over torquing is avoided. Torque is fully adjustable by rotating the end of the wrench and reading the graduations. Displays in both Ft Lbs and NM. The AR models all feature ratchets for ease of operation.

Impact Sockets, Adaptors & Accessories​

1/2″ Square Drive: Hex/AF Sizes (Metric): 8mm – 58mm Hex/AF Sizes (Imperial): 5/16″ – 1-1/2″
3/4″ Square Drive:  Hex/AF Sizes (Metric): 13mm – 67mm  Hex/AF Sizes (Imperial): 1/2″ – 3″
1″ Square Drive:  Hex/AF Sizes (Metric): 17mm – 115mm  Hex/AF Sizes (Imperial): 5/8″ – 4-1/2″
1-1/2″ Square Drive:  Hex/AF Sizes (Metric): 30mm – 175mm  Hex/AF Sizes (Imperial): 1-3/16″ – 6-1/2″
2-1/2″ Square Drive:  Hex/AF Sizes (Metric): 50mm – 210mm  Hex/AF Sizes (Imperial): 2″ – 8″

Impact Sockets 6 Point – Standard Reach – 6 Point impact sockets or female hex are the Industry standard configuration socket. The length of the socket is designed to drive a normal sized nut with a small amount of thread excess. The drive end or input side is female square drive. As the socket size increases, so does drive size to accommodate additional torque. All sockets offer relieved corners & and pin hole retainer options. Socket sizes are engraved for easy identification.

Manual Torque Multipliers​

Part No. Model Ratio Input Drive Output Square Torque Max Ft Lbs Torque Max NM Weight (KG)
H-90221 HT3 2700 5:01 3/4″ Female 1″ 2000 2700 3.8
H-90021-1 HT4/26 26:01:00 1/2″ 1″ 3300 4500 8.9
H-90021-2 60/125 125:01:00 1/2″ 1 1/2″ 4400 6000 12.1

Torque Multipliers to be used with hand torque wrenches.

Impact Wrenches/Rattle Guns​

Part Number Model Square Drive Max Torque Handle RPM CFM Weight (KG)
91062 2906P1 1/2″ 500 ft lbs Pistol 5,000 23 2.72
91062 2705P1 1/2″ 400 ft lbs Pistol 8,500 23 2.55
91062 2707P1 1/2″ 450 ft lbs Pistol 7,750 26 2.72
91062 2125PTiMAX 1/2″ 332 ft lbs Pistol 15,000 17 1.14
91062 2135PTiMAX 1/2″ 780 ft lbs Pistol 9,800 24 1.79
91062 2135QPTiMAX 1/2″ 780 ft lbs Pistol 9,800 24 1.79

2,900 Series – 1/4” NPT inlet, Built-in power regulator, Pin-type socket retainer, Twin Hammer mechanism, Integral muffler, Pressure-feed lubrication system, Built-in lubricator, Durable epoxy-coated handle 
2,700 Series – 1/4″ NPT inlet, Built-in power regulator, Pin-type socket retainer, Twin Hammer mechanism (except for 2903P1), Steel hammer case, Durable epoxy-coated handle, Pressure-feed mechanism lubrication 
MAX Series – 1/4” NPT inlet, Built-in power regulator, Pin-type socket retainer, Twin Hammer mechanism, Composite housing, Titanium hammer case (Ti models), Reverse-biased motor

For Purchasing or hiring enquiries give us a call or send us a message